Welded Tubing

Welded Composition | Precipitation-Hardened Stainless | Tubing Dimensional Chart

Alloy Grade	UNS No.	ASTM B	ASME SB	AMS
625	N06625	704	704	5581
15-5PH	S15500			5659
17-7PH	S17700			5568
17-4PH	S17400			5643 & 5622
ALLOY X	NO6002	626		5588
*Additional Alloy Grades may be available upon request
*WELDED CONDITIONS AVAILABLE:*
Welded to size, ID bead not reduced (as welded) Welded, sink drawn, ID bead not reduced Welded, sink drawn, ID bead reduced to a maximum height Welded, mandrel drawn, ID bead removed, wall reduced

*Precipitation-Hardened Stainless*
Grade	Condition	0.2% Yield (KSI)	Ultimate (KSI)	Elongs. in 2"	Hardness
UNS S17400	A	-	-	-	RC36
	H900	183	198	15	RC44
	H1025	162	168	16	RC38
	H1075	148	164	17	RC36
	H1150	126	144	20	RC33
	H1150m	87	123	22	RC27
UNS S15500	A	-	-	-	-
	H900	185	200	14	RC35
	H925	175	190	14	RC44
	H1025	165	170	15	RC42
	H1075	150	165	16	RC38
	H1100	135	150	17	RC34
	H1150	125	145	19	RC33
	H1150m	85	125	22	RC27
UNS S17700	A	40	130	35	B85
	TH1050	185	200	9	RC43
	RH950	220	235	6	RC48
	C	190	220	5	RC43
	CH900	260	265	2	RC49

*Tubing Dimensional Chart*
Outside Diameter Size Range, in.	Outside Diameter Tolerance	Inside Diameter Tolerance	Wall Tolerance
Up to inclusive 1/2"	+.003" -.003"	+.003" -.003"	+5% -5%
>1/2", but less than 1"	+.004" -.004"	+.004" -.004"	+5% -5%
1", but less than 1 1/2"	+.005" -.005"	+.005" -.005"	+5% -5%
1 1/2", but less than 2"	+.006" -.006"	+.006" -.006"	+5% -5%
2", but less than 2 1/2"	+.007" -.007"	+.007" -.007"	+5% -5%

Welded Composition